licPumpsHydrau■Hydraulic circuit diagram ■EPH-10Cil8llilOl CooerSMPSeriesEectricPumpsSpecaPumpsManuaPumpsBatteryPumps11MPaMake-to-order product■ Specifications■Engine specificationsEngine Pump (EPH Series)Hydraulic oil6.5ISO VG32Maximum output kWNo.79E since2025Discharge volume L/min(at 1600 rpm)0.9Rated outputkW1.6Special Pumps● If the relief valve (GRV-13) is operated for a long time, pay attention to the rise in oil temperature. During operation, the hydraulic oil temperature must be within 5 to 60 °C. If the oil temperature exceeds the proper range, the equipment is damaged and need repair (replacement of parts or the hydraulic fluid) at an early stage, resulting in poor performance.Tank oil volumeLEffective oil volumeL11.42.2Approx.weightkg8.460Fuel tank capacityL1.694● This pump is driven by a gasoline engine and is used where there is no power supply instead of an electric pump or manual pump.● More efficient work using a two-stage discharge pump.● Reduced fuel consumption and emissions of exhaust gas and toxic substances using a 4-stroke engine.● Approx. 25 % lighter than conventional engine pumps.● Equipped with a roll bar and pressure gauge (φ 60 × 100 MPa) as standard.● The direction-control valve (GSHV-43) maintains the pressure during the switching transition period or in neutral.Maximum operating pressure MPaModelHigh pressureLow pressureHigh pressureLow pressureEPH-10C70TypeAir-cooled 4-strokesingle cylinder inclination type■EPH-10C
元のページ ../index.html#95