tt l lispmuPspmuP yreBABVPT lilOLL launaMaBseireSPMSspmuP cirtceEspmuPacepSreooCilspmuPcuardyH■ Motor specifications■ Pump specificationsMake-to-order productcat-No.78E since2017■MP-17HCTypeFully-enclosed fan-cooled typeMaximum operating Modelpressure MPaMP-17HCMP-17HSMP-17HTK■MP-17HC70● Do not supply power continuously to the solenoid valve of the MP-17HS for one minute or longer while pressure is applied. Otherwise, switching by the spool is not possible.Voltage(Number of phases)200 (3 phases)Discharge volume L/min(50/60 Hz)5.0/6.0*The load current means the peak current (reference value). It varies depending on the operating status.■MP-17H series hydraulic circuit diagrams OutputRated current A50 Hz60 Hz30.032.0kW7.5Outlet portHydraulic Rcoil3/8ISO VG46Electric pumpLoad current A50 Hz60 Hz38.034.0Tank oilvolumeEffective oil volumeoperating valve15570SOW-44B-2No.1Oil tank4Motor5Electric magnetic switch6Push-button switch13High-pressure safety valveRE-2318Pressure switch22Direction-control valveHOV-4327Air breather29Oil level gauge34Oil drain port35Return port36Outlet port* The above numbers do not correspond to the part numbers of the product. For the part numbers of the product, see the operation manual.TypeC:For double-acting cylinders (manual direction-control valve)S:For double-acting cylinders(solenoid operated direction valve)TK:For separately installed operating valve(W/O attached operating valve)Series No.72MPaNumber of revolutions rpm50 Hz150060 Hz1800Attached Approx.weightkg450460450HOV-43N/ANameNotesDPGS-70With refill portRc1 1/2Rc3/4Rc3/8HOV-43SOW-44B-2TK-3MP-17HCAMP-17HSMP-17HTKModel code structureMP-17HCElectric PumpsOne-Stage Electric Pumps (7.5 kW) ■MP-17H series● Thanks to a high-performance axial piston system, the series features very small changes in discharge volume caused by pressure fluctuation.● Equipped with a double safety mechanism using a safety valve and pressure switch to prevent an overload.● For descriptions of models and precautions, see pages 75 to 78.* No power cable is included with the product.* The direction-control valve of the S model is not wired.* The pump stops automatically at the preset pressure for the pressure switch. To reboot the pump, use the push-button switch (No. 6).87
元のページ ../index.html#88