licPumpsHydrau■MP-15 series hydraulic circuit diagrams ■MP-15C■MP-15CilCooerSMPSeriesEectricPumpsSpecaPumpsManuaPumpsBatteryPumpsMP-15CBAMP-15SBAMP-15TKTwo-Stage Electric Pumps (3.7 kW) Model code structureMP-15C*The load current means the peak current (reference value). It varies depending on the operating status.HOV-44SOW-44B-2PT6llilOl TK-4Electric Pumps● Do not supply power continuously to the solenoid valve of the MP-15S, 15S (-PA) for one minute or longer while pressure is applied. Otherwise, switching by the spool is not possible.*The power cable is 2.5 m long with a 3-pin plug (grounding type) for 20 A and 250 V.*The direction-control valve of the S model is not wired.Electric pumpTypeC:For double-acting cylinders (manual direction-control valve)S:For double-acting cylinders (solenoid operated direction valve)(W/O attached operating valve)Series No.* The above numbers do not correspond to the part numbers of the product. For the part numbers of the product, see the operation manual.S-PA:Package pump for double-acting cylinders(solenoid operated direction valve)TK:For separately installed operating valve8.5MPa73MPa9.5MPaTypeFully-enclosed fan-cooled typeMaximum operating pressure MPaModelHigh pressureLow pressureAt high pressureAt low pressureMP-15C70MP-15SMP-15TKVoltage (Number of phases)V200 (3 phases)Discharge volume L/min(50/60 Hz)2.5/3.020.0/24.0Rated current AOutputkW50 Hz60 Hz3.716.015.0Outlet portRcHydraulic oil1/2ISO VG32No.79E since2025Load current A50 Hz60 Hz17.020.0Tank oilvolumeLEffective oil volumeL5030NameNo.1Oil tank4Motor56Start switch13High-pressure safety valve14Low-pressure safety valve15Unloading valve18Pressure switch22Direction-control valve27Air breather29Oil level gauge34Oil drain port35Return port36Outlet portElectric magnetic switchNumber of revolutions rpm50 Hz60 Hz15001800Approx.weightkgAttached operating valveHOV-44190SOW-44B-2202N/A188NotesDPGS-70HOV-44Rc1/2Rc3/4Rc1/286■MP-15 series● This series combines high- and low-pressure pumps, which is driven by a motor, to improve operating efficiency.● Equipped with a double safety mechanism using a safety valve and pressure switch to prevent an overload.● MP-15S-PA package pumps have a switch box with two push- button and a control box, and can be used immediately after the power supply is connected to the pump.● The package pumps are make-to-order products.● For descriptions of models and precautions, see pages 75 to 78.■ Motor specifications■ Pump specifications
元のページ ../index.html#87