HTML5 Webook

79/248

licPumpsHydrau—llilOl ■ETK-1■TK-10■TK-4 ilCooerSMPSeriesEectricPumpsSpecaPumpsManuaPumpsBatteryPumps■ Specifications for motors for one-stage electric pumps■ Specifications for motors for two-stage electric pumps● Attached to P and T ports to make a connection with equipment when a valve stand is installed separately.　To mount the TK-3 or 4, use mounting holders. (See page 112.)●Pumps with a model No. ending in “TK” include plates shown below.■ Specifications tableSpecifications for Electric Pump MotorsOutlet plates (TK plates)ModelTypeMP-4Capacitor-start open typeEMP-6 MP-12HFully-enclosed fan-cooled typeMP-15HMP-17HMP-20HModelTypeEMP-5MP-10MP-12Fully-enclosed fan-cooled typeMP-15MP-17MP-20ModelTK-3/TK-4TK-3TK-4TK-10ETK-1Electric Pumps*The load current is the peak current (reference value). It varies depending on the operating status.*The load current is the peak current (reference value). It varies depending on the operating status.Note: The size of P and T ports on the top of the TK-4 is Rc3/8.■TK-3 60 Hz50 Hz60 Hz6.08.09.03.04.04.53.54.04.010.010.010.015.015.016.030.034.038.056.064.068.060 Hz50 Hz60 Hz3.53.53.56.57.08.010.010.010.015.017.020.030.036.041.056.064.068.0Connection port sizeRc3/8MP-15/20H1/2 (Note)MP-103/8EMP-5/EMP-650 Hz60 Hz1500180050 Hz60 Hz15001800Approx.weightkg2.02.02.20.7Voltage (Number of phases)V100 (single phase)200 (single phase)200 (3 phases)Voltage (Numberofphases)V200 (3 phases)Hydraulic symbolTK-10OutputkWRated currentALoad currentANumber of revolutions rpm50 Hz7.00.43.50.754.02.211.03.716.07.532.01560.0OutputkWRated currentALoad currentANumber of revolutions rpm50 Hz0.754.01.57.02.211.03.716.07.532.01560.0Compatible pumpETK-1MP-12/12H/15H/17HNo.79E since202578