cat-No.78E since2017Do not get in under an object that is jacked up.The cylinder must be used on a flatsurface. Be sure to apply a load tothe center of the rod.Do not apply a load that exceeds the maximum cylinder output.Do not hold the operating valve with a pair of pliers.Do not throw hydraulic equip-ment or handle it roughly.Do not remove the coupler while pressure is applied.Do not bend the hose to a bendradius smaller than the minimumone specified in the catalogue.A duster cap is included with the coupler. Attach the cap to the coupler after use to prevent dust.Be sure to open the air valve before use. When moving the equipment to another location, do not lift it by holding the hydraulic hose.Do not place or allow any object to fall on the hose.Use the product within the oil vol-ume range of the oil level gauge.6Handling Precautions for Hydraulic EquipmentOpenClosed
元のページ ../index.html#7