HTML5 Webook

54/248

srednitcA-egnSsrednitcA-ebuoDililyCgnyCgnsrednil l ABC il liatstrapil rednyCAR-206250R-207500R-208750R-215125yCaD24ɸ500(756)23ɸacepSililsrednyCcuardyH■100 kN attachments cat-No.78E since2017ModelFor 100 kN MI-10For 200 kN MI-20 ■For 100kNR-103 (Four-legged cap)For piston threads and pipes R-107 (Collar toe) *Be careful of an eccentric load.For piston threads and pipes R-117 (Female joint) *NoteR-202 (Female joint) *Note1 1/4-11.5NPTM28 x 22-11.5NPTM40 x 2Pipe Approx. weight: 0.8 kg Approx. weight: 1.2 kg*The dimensions in parentheses show those of the R-114. Approx. weight: R-113: 0.5 kg Approx. weight: 3.4kgFor piston threads and pipes R-105 (Triangle cap)For collar threadsR-306 (Threaded connector)Pipe R-113/R-114R-205 (Collar toe)Approx. weight(kg)370.2450.5 ■For 200kNR-114: 1.1 kg Approx. weight: 1.9 kg Approx. weight: 0.4 kg Approx. weight: R-115: 2.2 kgR-311: 3.3kgR-106 (Cylinder For base threads R-116 (Male joint)R-115/R-3112 X (1 1/4-11.5NPT)R-206/R-207/R-208/R-215 (Pipe)Basethread base)Pipe4 X ɸ11.5(5 X ɸ11.5)*The dimensions in parentheses show thoseoftheR-311.Approx.weight(kg)3.06.19.31.5PistonthreadCollarthreadCylinder Parts100 and 200 kN Attachments for Unified Threaded Cylinders ●Attachments suitable for each work are mounted using the piston thread,collar thread,and/or base thread of the cylider.●Only those to be mounted to the piston thread can be used in MS and MD series cylinders by using the following thread caps. ● By using attachments, a small eccentric load could become big moment applied to the cylinder, which may overturn or damage the cylinder. Taking into consideration the allowable eccentric load to the cylinder, use a guide if needed.● Depending on the combination of attachments, the cylinder may not be used at the maximum operating pressure. ● Do not use two or more connected pipes with female joints. Approx. weight: 0.9 kg Approx. weight: 0.9 kg Approx. weight: 0.5 kg■200 kN attachments Approx. weight: 1.7kgThread Caps for 100 and 200 kN Attachments (Metric-to-Unified Thread Conversion Bushing)●Used for mounting an attachment to the piston thread of MS and MD series cylinders.*No attachments can be mounted to the collar and base threads of MS and MD series cylinders.53Examples of Attachment Combinations*Be careful of an eccentric load.