HTML5 Webook

48/248

■■AAGDCEBFAAAPJK7N49 il liatsrednitcA-egnSsrednitcA-ebuoDililyCgnyCgnsrednil lstrapil rednyCacepSyCaD☆ mark: Maximum allowable radial load at the center of the shaft (unit: kN) *For the VC-70-R3, S-1R, and ROC-13R, the coupler protrusion lengths are about 46 mm, 53 mm, and 49 mm, respectively. *Connect a drain pipe to the gear case. *The external drawings show the key position of the standard product, at which the ram rotates to both right and left by half the rated angle. *Make to order is possible if the key position needs to be changed or angles other than the above are required. *When oil is fed to the right port, the shaft rotates counterclockwise. When oil is fed to the left port, the shaft rotates clockwise. *Do not carry out a securing method that applies a thrust load to the shaft. * When the equipment is self-propelled due to changes in moment, install a valve (counterbalance valve) to prevent the equipment from being self-propelled in the circuit. *The backlash between the pinion and rack of the rotation ram is between 0.5 and 1°. ililsrednyCcuardyH■ Specificationscat-No.78E since2017Double-Acting Cylinders0.5 to 20 kN·m Rotation Ram (SRP Series)Maximum operating pressure: 30 MPa • Make-to-order product● An oscillating-type actuator that rotates the pinion using a rack with pistons at both ends to generate strong torque at the shaft, resulting in almost no heat and noise.Maximum operating pressure30 MPaMaximum output torque Cylinder systemCoupler connection port size■SRP-1-90SHydraulic symbol All SRP series modelsModelMaximum output torqueTheoretical pressureRotation angle 90°180°360°220296446ModelSRP-05180.5122SRP-1230.5172SRP-5337.5232SRP-10421.5260SRP-20526.53040.5/1/5/10/20 kN • mDouble-actingRc3/8SRP-050.5 kN • m25.0 MPaSRP-11 kN • m20.5 MPaRequired oil volume cm376150300*Set the operating torque to 80 % of the maximum one or less. HRequired oil volume cm33263124Approx. weightkg12.513.515.027838259012390614545160120756757254180116868626217011012080349244156126126Rotation ramSRP seriesModel code structureSRP-55 kN • m22.0 MPaApprox. weightkg37.038.541.5Required oil volume cm335270414074786901114Lϕ M104630126010452010515702014515802822010110Maximum torque Rotation angle Attached coupler05:0.5 kN • m1 kN • m1:5 kN • m5:10 kN • m10:20:20 kN • m90:90°180:180°360:360°SRP-1010 kN • m25.4 MPaApprox. weightkg798597Required oil volume cm360912182436Approx. weightkg1171271504976671007Qϕ R☆Mounting thread 331179355481461177074.520416010484.5238193155116282222155VC:VC-70-R3S:S-1RT:ROC-13R-NC:W/O couplerSRP-2020 kN • m28.6 MPaRequired oil volume cm3108221644320Approx. weightkg21322524968899015932.53 x (4 x M10 DP15) 3 x (4 x M12 DP25) 3 x (4 x M16 DP25) 123 x (4 x M18 DP30) 203 x (4 x M24 DP40) 47SRP-1-90VC