HTML5 Webook

208/248

–aPM002)393(531701ill53 srednspmuPsevaVseirosseccA–aPM003yCSmall-Size Portable Ultrahigh-Pressure Electric Pumps (SMP-200 Series) Tank capacity Motor voltage 6:6.5 LShape of the tip of the power cable (Cord length 3m)100VSmall-Size Portable Electric Pumps (200 MPa)200 MPa seriesSmall-size portable ultrahigh-pressure electric pump*No certificates can be issued for the ASBG100-250M-U pressure gauge.● The SPS-2K pressure switch is exclusively used for the SMP-200 series. If the switch is used with other products, please contact us.● When the motor of model SMP-200-*B is turned on, the piston of the single-acting cylinder may extend or the extended piston may not return even if the directional control valve(SMV-2K-3) is fully open.● If the pump is used continuously, observe the rated operating time (5 minutes) and take care of the increase in motor and oil temperatures. Otherwise, the equipment may be damaged resulting in poor performance.*1. Each current shown above is the average of the load currents at 200 MPa. (Values are for a hydraulic fluid temperature range of 30 to 40°C. )*2. Each of the double-acting cylinder (C) models is about 1 kg heavier than the corresponding approx. weight shown above.● The oil tank is filled up with hydraulic oil before shipment. 2:2.0 L4:4.5 L1:100 V2:200 V3:230 V210MPa3MPa210MPa3MPaOil tankApprox. weightkg*2Tank oil volume LEffective oil volumeL2.01.8184.54.0216.56.0242.01.8184.54.0216.56.0242.01.8184.54.0216.56.024Attached pressure gauge Blank:ASBG100-250M-UAttached valve200V/230VA:ASG100-250M-UN:W/O pressure gaugeB:For single-acting cylindersC:For double-acting cylindersRated operating time minRatedoutputkWCurrentA*114.50.457.05.5Pressure switch SPS-2KDirection-control valve (SMV-2K-3)M14X1.5PumpMaximum operating pressure MPaHigh pressureLow pressureAt high pressure200Pressure gauge(ASBG100-250M-U)(182)No.79E since2025Model code structure■ Specifications■SMP-200-14BSW-4ADischarge volumeL/minHydraulic oilAt low pressureISO VG460.12.0 ■SMP-200-*B hydraulic circuit diagram ■SMP-200-*C hydraulic circuit diagram207● With a magnet motor, noise is reduced greatly as compared with that of conventional models. The durability has also been improved. ● Lightweight, compact, and easy to handle. Ideal for field work such as shipbuilding and civil engineering construction. ● Due to the two-stage speed control, the pressure automatically switches between high and low speed modes for better work efficiency.● All models have an M14 × 1.5 outlet port.● A special pressure switch is mounted on each model.Type E closed-type magnet motor (50/60Hz) ModelVoltageV(single phase) SMP-200-12B(C) SMP-200-14B(C) 100SMP-200-16B(C) SMP-200-22B(C) SMP-200-24B(C) 200SMP-200-26B(C) SMP-200-32B(C) SMP-200-34B(C) 230SMP-200-36B(C) ■SMP-200-12B (22B/32B) Air valve and refill port with level gauge(257)(285)Remote controlled operating switchSW-4A (Cord length 3m)SMP-200-14B-A