HTML5 Webook

195/248

SandardPress SandsMni Press SandsBoTensonersCoupngPuBearing Pult lillerslltttraghersersenersRodCu08204)002(03071032MastPunchPort Punch0996er PunchngsCabeCutters■RS-4-SW/RS-10-SWWiring diagraml iiat titi Sitil Equpment for SpecUse■ Specificationscat-No.78E since2017● Used for straitening of the tip of coil rods and bending and straitening of rod materials. ■RS-4-SWVCMaximum Modeloperating pressureMPaRS-4-HVRS-4-SWRS-10B-HVRS-10B-SW■RS-4-HVVC70Tank port *(Rc1/2)* Do not attach the coupler to the tank port, instead attach the low-pressure hose directly to the tank port.■RS-4-SWVC(253)VC-70-R3Cylinder (S04-70RS)Straightening (R-403)Hand switch (SW-1VC)VCT operating cable : 1.25mm2 X 2C 0.5m■Hydraulic symbol RS-4-HV/RS-10-HVOutputkNTensile strength 500 N/mm240100(523)133(137)(65)■Example of the use of an HV modelDo not attach the coupler to the tank port, instead attach the low-pressure hose directly to the tank port.High-pressure hosePumpTankLow-pressure hoseCap (R-402)Straightening capacityTensile strength 1000 N/mm2ϕ 25ϕ 20ϕ 36ϕ 28■RS-10B-HVVCTank port *(Rc1/2)■RS-10B-SWVCVC-70-R3Cylinder (S1-120RS)Hand switch (SW-1VC)StraightenerModel code structureCouplerTank portHV:With 3-way hand valve SW:With hand switch 4:40kN10B:100kNStraightening equipmentCylinderS04-70RSR-403S1-120RSR-331(691)(277)(218)Straightening (R-331)VCT operating cable : 1.25mm2 X 2C 0.5mAttached couplerCap (R-332)VC:With VC-70-R3 S:With S-1RT:With ROC-13RApprox. weightCapkgR-4026.513.612.5R-332(196)(97)StraightenersStraighteners194RS-4-HVVC