HTML5 Webook

189/248

EqupmentforSpecUseAdimension25253030ɸ195ɸ145ɸ25.4ɸ25.4■CD-50■CD-10-10MiialAiit(liit(lttiiiSiil yc)redn)rednililcirteMNk001(lillersllBoltTensonersCoupngPuBearingPuMastPunchPortPunch887）193（79)nosnemd-D(094196）733（oN02)nosnemd-D(024SandardPressSandsergnitca-ebuoDNk002()eoNycdedaerhtgnitca-ebuod)ePressStandsMntraghtenersersRodCutters261230314914112328PunchngsCabeCutters0813717907371■ SpecificationsModel code structureCD-10-10MCD Standard Press Stands*Dimension D can be changed to a specified one. (Make-to-order product) *Dimension D can be changed to a specified one. (Make-to-order product) ● Press frames compatible with Riken’s 70 MPa standard cylinders. ModelFramecapacityCD-10-4SCD-10-45100 kNCD-10-10CD-10-10MCD-20-10CD-20-10MCD-20-20200 kNCD-20-20MCD-50-35CD-50-50500 kNCD-100-1001000 kN■CD-10-10M525C shaped flangeCap379.6355565Parallelism between the upper and lower frames (max.)Approx. weightkg±0.345±0.380214±0.5212±1.3305ModelCD-20-10CD-20-10MCD-20-20CD-20-20MPillar136.6232Compatible cylinderS04 single-acting cylindersMC05/MS05 single-acting cylinders/D04/MD05 double-acting cylinders S1 single-acting cylinders/D1 double-acting cylindersMC1/MS1 single-acting cylinders/MD1 double-acting cylindersS1 single-acting cylinders/D1 double-acting cylindersMC1/MS1 single-acting cylinders/MD1 double-acting cylindersS2 single-acting cylinders/D2 double-acting cylindersMC2/MS2 single-acting cylinders/MD2 double-acting cylindersD3.5 double-acting cylindersS5 single-acting cylinders/D5 double-acting cylindersD10 double-acting cylinders (D10-500 cylinders cannot be mounted.) 4 X ɸ15Cylinder mounting threadsFlangeUpper framePillarLower frameStandard Press Stands* The weight does not include the weights of the cylinder and other equipment. * The parallelism between the lower frames is approx. ±0.5. If the frames needs to be parallel, use the stand with a die set and so on. Note. The dimensions shown above vary depending on the cylinder used. They are the minimum values.Cylinder mounting threadFrame capacityCD standard press standCD-104S:1 1/2-16NS45:M45×1.510:2 1/4-14NS10M:M58×2CD-2010:2 1/4-14NS10M:M58×220:3 5/16-12NS20M:M82×2CD-5035:M110×2.550:M127×2.5CD-100100:M170×310:100kN20:200kN50:500kN100:1000kNCylinder mounting thread1 1/2-16NSM45 x 1.52 1/4-14NSM58 x 22 1/4-14NSM58 x 23 5/16-12NSM82 x 2M110 x 2.5M127 x 2.5M170 x 3622Cylinder mounting threadsCapUpper frameFlange474.6452662Lower frame■CD-20-20M4 X ɸ16C shaped flange88.6176No.79E since2025188