HTML5 Webook

178/248

seguaGerusserPsehctiwSerusserP lsOisehctisehcnarBlistnoJwSsrepuoCsesoHseirosseccAcat-No.78E since2017HosesHigh-Pressure Nylon Hoses (NH3/8 Series) ● About half the weight of a high-pressure rubber hose.● With R (male) threaded joints at both ends. Basically used with an H type coupler Note 1. The operating temperature range shown above can be applied to the hose alone. Note 2. The approx. weight represents the weight of the hose alone. It does not include the joints at both ends and the protection covers. ■Compatibility list of hose types and lengths, pumps, and cylinders Note 1. The operating temperature range shown above can be applied to the hose alone. Note 2. The approx. weight represents the weight of the hose alone. It does not include the joints at both ends and the guard springs.■Compatibility list of hose types and lengths, pumps, and cylinders ■ SpecificationsMaximum operating pressure■ SpecificationsMaximum operating pressureon one of its sides. In the case of the VC series, VC-70-RC3 couplers are at-tached. ■NH3/8Operating temperature range (°C)(Note 1)ModelMPaNH3/870-40 to 80ModelStandard overall length mNH3/8-*VCNH3/8-*SNH3/8-*TNH3/8-*DNote. If the MP-12 uses a hose having a length of 5 m or shorter and a high-pressure hose having a length over 5 m, select a NH3/8-*VC model and a H3/8B model, respectively.*The hose size is determined by the outlet port of the pump. Change the coupler of the cylinder if the couplers of the hose and the cylinder do not match. *Hoses having an overall length other than the above can be manufactured. (Make-to-order product)High-Pressure Rubber Hoses (H1/2 Series) ● With R (male) threaded joints at both ends. Basically used with an H type coupler 0.5/1/1.52/3/4/56/10/15on one of its sides. In the case of the VC-70 series, VC-70-RC4 couplers are attached.■H1/2Operating temperature range (°C)(Note 1)ModelMPaH1/270-40 to 100ModelStandard overall length mNH3/8-1VCNH3/8-1SNH3/8-1TH1/2-1NCHydraulic oilGeneral hydraulic oil(mineral-based hydraulic oil) Pump connectable to the threaded end of a hoseAll manual pumps/foot pumps/battery pumps/SMP-30/SMP-40/EMP-5/EMP-6/MP-4/MP-10/MP-12H/MP-12 (Note)/MP-15H/MP-17H/variable discharge pumps/air hydraulic pumpsHydraulic oilGeneral hydraulic oil(mineral-based hydraulic oil) Pump connectable to the threaded end of a hoseMP-15/MP-20H1/2/3/6/10■NH3/8Thread External diameterMaterialsizeRϕ Nylon3/812.8■H1/2Thread External diameterMaterialsizeRϕ Synthetic rubber 1/222.8*The hoses marked “*” are filled with the hydraulic oil before shipping unless otherwise specified. Note 100mm if the overall length is 0.5mOveralllength (m) VCW:With VC-70-RC3 on both sides*Thread size3/8:R3/8High-pressure nylon hoseOveralllength (m) VCW:With VC-70-RC4 on both sides*Thread size1/2:R1/2High-pressure rubber hoses*The hoses marked “*” are filled with the hydraulic oil before shipping unless otherwise specified. Attached couplerVC:With VC-70-RC3 on one sideAttached couplerVC:With VC-70-RC4 on one sideS:With S-1H on one sideSW:With S-1H on both sides*T:With ROC-13H on one sideTW:With ROC-13H on both sides*D:With S-23H on one sideDW:With S-23H on both sides*NC:No couplersB:With S-3H on one sideBW:With S-3H on both sides*C:With S-24H on one sideCW:With S-24H on both sides*NC:No couplersMinimum bend radiusmm600.21Minimum bend radiusApprox. weightkg/m(Note 2)mm1700.83Approx. weightkg/m(Note 2)Model code structureNH3/8-1VCModel code structureH1/2-1VCInternal diameterVolumeExpansion volumecm3/mϕcm3/m6.331.24.8Cylinder connectable to the coupler side of a hose40 to 1000 kN single-acting cylinders 40 to 350 kN double-acting cylinders 500 to 2000 kN double-acting cylinders Internal diameterVolumeExpansion volumecm3/mϕcm3/m12.712716.3Cylinder connectable to the coupler side of a hoseH1/2-*VC (B/C)500 to 2000 kN double-acting cylinders * The hose size is determined by the outlet port of the pump. Change the coupler of the cylinder if the couplers of the hose and the cylinder do not match. * Hoses having an overall length other than the above can be manufactured. (Make-to-order product)* In the case of the MP-15, if the speed under no load condition has priority, select a H1/2-*B model. 177