HTML5 Webook

177/248

Accessories■H3/8B■ANHilRϕϕRϕlOsi PressureGaugesPressureSwitchesitchesBranchesCoupersHosesJontsSw*The hoses marked “*” are filled with the hydraulic oil before shipping unless otherwise specified. Model code structureANH3/8-1NCHigh-Pressure Rubber Hoses (H3/8 Series) Anti-Spatter Hoses (ANH Series) (Make-to-order product)Model code structureH3/8B-1VC(Note) 150 mm if the overall length is 0.5 m. Attached couplerS:With S-1H on one sideSW:With S-1H on both sides*T:With ROC-13H on one sideTW:With ROC-13H on both sides*D:With S-23H on one sideDW:With S-23H on both sides*NC:No couplersMinimum bend radius Approx. weightkg/m(Note 2)mm1000.381300.66Approx. weightkg/m(Note 2)Minimum bend radiusmm1000.48● With R (male) threaded joints at both ends. Basically used with an H type coupler attached to one of its ends. In the case of the VC-70 series, RC couplers are attached. ● Two different internal diameters are available for the H3/8 series. Use an H3/8B type for the MP-12 series.■H3/8Operating temperature range (°C)(Note 1)ModelH3/870-40 to 100H3/8BModelStandard overall length mH3/8-*VC0.5/1/1.52/3/4/56/10/15H3/8-*SH3/8-*TH3/8-*DH3/8B-*D1/2/3/6/10● Wrapped with a new material that is resistant to weld spatters and equipped with SUS joints at both ends. ● Specify the overall length required in increments of 1 m. (Only the 3/8 size is available.) ● No coupler is included. Please let us know the coupler type if couplers are required, referring to pages 170 to 173.Maximum operating pressureModelMPaANH3/870(Note 1)NC:No couplersOverall length (m) VC:With VC-70-RC3 on one sideHose internal diameterBlank:Hose internal diameter ϕ 6.3B:Hose internal diameter ϕ 9.5VCW:With VC-70-RC3 on both sides*Thread size3/8:R3/8High-pressure rubber hoseThread sizeOverall length (m) 3/8:R3/8Anti-spatter hoseHosesNote 1. The operating temperature range shown above can be applied to the hose alone. Note 2. The approx. weight represents the weight of the hose alone. It does not include the joints at both ends and the guard springs.■Compatibility list of hose types and lengths, pumps, and cylinders Note. If the MP-12 uses a hose having a length of 5 m or shorter and a high-pressure hose having a length of 6 m or longer, select a H3/8-* VC model and a H3/8B model, respectively.*The hose size is determined by the outlet port of the pump. Change the coupler of the cylinder if the couplers of the hose and the cylinder do not match. *Hoses having an overall length other than the above can be manufactured. (Make-to-order product) Note 1. The operating temperature range shown above can be applied to the hose alone. Note 2. The approx. weight represents the weight of the hose alone. It does not include the joints at both ends. ■H3/8Thread sizeExternal diameterMaterial14.7Synthetic rubber3/820MP-12 (Note)Hydraulic oilGeneral hydraulic oil(mineral-based hydraulic oil) No.79E since2025Internal diameterVolumeExpansion volumecm3/mcm3/m8.031.26.39.57110.4Cylinder connectable to the coupler side of a hose40 to 1000 kN single-acting cylinders 40 to 350 kN double-acting cylinders 500 to 2000 kN double-acting cylinders 500 to 2000 kN double-acting cylinders Thread sizeInternal diameterVolumecm3/m3/86.333■ SpecificationsMaximum operating pressureMPa■ SpecificationsH3/8-1VCH3/8-1SH3/8-1THydraulic oilGeneral hydraulic oil(mineral-based hydraulic oil) Pump connectable to the threaded end of a hoseAll manual pumps/foot pumps/battery pumps/SMP-30/SMP-40/EMP-5/EMP-6/MP-4/MP-10/MP-12H/MP-12 (Note)/MP-15H/MP-17H/variable discharge pumps/air hydraulic pumpsOperating temperature range (°C)-10 to 70176