HTML5 Webook

174/248

07φseguaGerusserPsehctiwSerusserP84φ-6 CseirosseccA■External drawing of couplings (S-8C)■S-8CH■S-8CR■S-8CsehctisehcnarBlistnoJwSsrepuoCsesoHlsOiSR3R ■ Specifications■ SpecificationsCouplers (S-6C/S-8C Series) One-Touch Couplers (ROC Series) ■Hydraulic symbol (coupled couplers) ■S-6CR70General hydraulic oil■ROC-13HOperating fluid70General hydraulic oilR:H:(114)(125)Cylinder side couplerHose side couplerR:Cylinder side couplerH:Hose side coupler■External drawing of couplings (S-6C)Approx.weight kg0.80.91.91.8*The approx. weight represents the weight of the coupler and a steel duster cap.R3/4Rc3/4R1Rc1Approx. weightkgThread sizeR3/8Rc3/8● Self-sealing type that prevents oil leakage.● When the couplers are stored in the disconnect condition, please use the attached steel duster caps.* Cannot connect to the S-6/S-8 Series. ■S-6CMaximum operatingpressureMPaModelS-6CRS-6CHS-8CRS-8CH● Self-sealing type that prevents oil leakage.● Equipped with a lock mechanism to prevent detachment.● A duster cap (made of resin) is attached to all models.* Cannot connect to the VC-70. ■ROC-13■ROC-13RMaximum operating pressureMPaModelROC-13RROC-13H● Do not use one-touch couplers in a hydraulic circuit in which a shock is caused by large pressure fluctuation due to blanking, punching, or the like.　Otherwise, the equipment may be damaged. If the damaged parts are circulated in the hydraulic circuit, other equipment may be damaged.● One-touch couplers cannot be connected where pressure remains. Due to changes in ambient temperature, the pressure could increase inside the　hose with couplers at both ends or the cylinder, which makes it difficult to connect couplers. In that case, use the pressure elimination accessory　(page 175) to removal pressure before connection. (The maximum operating pressure of the pressure elimination accessory is 10.5 MPa)● After connecting the coupler, turn the sleeve to lock the coupler for preventing detachment.CouplerHEX29M40×1.5M54×1.5One-touch couplerRc3/8ROC-13RAccessory(steel duster cap)S-6CR-FDCS-6CH-FDCS-8CR-FDCS-8CH-FDC■Hydraulic symbol (coupled couplers) Accessory(duster cap)0.1ROC-13R-DC0.25ROC-13H-DCCouplersFor S-6C/S-8C series couplers, do not apply pressure to H or R type alone. Otherwise, the equipment may be damaged.ROC-13RR3/8HEX 2418（9）5528R3/4(67)R1HEX38(94)ROC-13HHEX 273.324（43）70.3Type (Thread size)6 C : 3/48 C : 8/8HEX4164Rc3/4HEX50(72)Rc1Connection port size3:3/8TypeROC-13H（105）Model code structureModel code structureROC-1■S-6CHOperating fluidThread size■External drawing of couplings (ROC-13)Operating fluid temperature range°C-30 to 100No.79E since2025173