HTML5 Webook

165/248

PressureGaugesPressureSwitchesitchesBranchesCoupers)481()851(57ilHoses)56()83(4495. lOsi)0001(21Jonts)03()941()56()481(SwAccessories■ Specificationscat-No.78E since2017Pressure SwitchesDigital Pressure Gauges (DPGS-70) ● The industry’s first digital pressure gauge　with CE marking. ● One digital pressure gauge alone can function　as both pressure display and pressure switch. ● The one-touch keys on the body allow easy　operation. The key lock is also provided to　prevent operator errors. ● The kN display is also available as a special　function. (The display range is from 0 to　1999.) ● Universal joint models allow users to select　the desired display orientation.Maximum operating ModelDPGS-70-G4-UDPGS-70-R3-UDPGS-70-R3-FDPGS-70-N3-UDPGS-70-N3-F* If an inverter is used, install the power supply for the DPGS-70 to the primary side.* When changing from a PCS type pressure switch (PCS-700, etc.) to this product, make sure not to exceed the contact capacity. ■Mounting methodModelDPGS-70-G4-UMount the gauge on a pressure gauge mounting bracket (page 163). The S-111 packing is required. DPGS-70-R3-UAfter securing the T-4 mounting bracket (accessory), mount the gauge using the S-111 packing (accessory). DPGS-70-R3-FAfter wrapping seal tape around the R3/8 joint, mount the gauge directly. (Note 2)DPGS-70-N3-UAfter securing the T-4-NPT mounting bracket (accessory), mount the gauge using the S-111 packing (accessory). DPGS-70-N3-FAfter wrapping seal tape around the NPT 3/8 joint, mount the gauge directly. (Note 2)Note 1. Because the measurement range of the sensor is 100.0 MPa, R.C. is 100 MPa. Note 2. A radius of about 70 mm from the center of the joint is required for the rotation of the DPGS-70. ■Hydraulic symbol ■External drawings of the DPGS-70 104□27Ground for protection terminal ■DPGS-70-R3-FM14×1.5■DPGS-70Rated voltagepressureAllowable voltageMPaRated voltage100 to 240 VAC 50/60 HzAllowable voltage85 to 264 VAC47 to 440 Hz70■Image diagram of output operation ■DPGS-70-G4-U56JN-U-G4(Universal joint)■DPGS-70-N3-UR3/8Factory settingPreset pressure:70 MPaDead band:5 MPaOutput operation:B contactMounting methodG1/2NPT3/8Output contact Display accuracy R.C.250 VACRoHS Directive Low Voltage Directive EMC Directive(industrial electromagnetic environment) ±1 %3 A (Note 1) (resistive load) 1A, 1B■DPGS-70-R3-UJN-U-G4(Universal joint)T-4(accessory)■DPGS-70-N3-FJN-F-N3NPT3/8Maximum operating pressure (MPa) Digital pressure gaugeConformed standardR3/8Joint type U:Universal joint Connection thread size F:Fixed joint G4:G1/2R3:R3/8N3:NPT3/8*G1/2 thread is available only for universal joints.Model code structureDPGS-70-G4-U164