HTML5 Webook

150/248

ilsevaVcuardyH1:For one tier (top face PT closed) 2:For two or more tiers 3:For one or more tier T■MB-3 ■Hydraulic symbol (MBSP-31)■MB-1ABTPABTP−PTPPTllllllDlli ABTPilortnoC-noitcerisnoitacppAfosepmaxEortnoCraudoMezS-egraLsevaVsevaVsevaVseireSDKseireSEseireSM■ SpecificationsM Series (Block Shaped Sub-Plate )M Series (Block)(with top face PT port) (with top face PT and side face P ports) ● This is a sub-plate required for stacking blocks on electric pumps (MP-10/12H/12/15H).*A connection pipe set (model：MP-12H#21S) and a return pipe (MP-12H#33) are required for mounting on MP-12H.*A connection pipe set (model：MP-12#21S) and a return pipe (MP-12#114) are required for mounting on MP-12.*A connection pipe set (model：MP-15H#21S) and a return pipe (MP-15H#33) are required for mounting on MP-15H.Maximum operating pressureMPaModelMBSP-3170MBSP-32■MBSP-31■Hydraulic symbol (MBSP-32)● These blocks are used when configuring two or more circuits with M series solenoid valves and other valves. It can be stacked up to 4 levels.● MBP-31 is required when these blocks are used separately from the pump (piping connection).● MBSP-31 is required when stacking blocks on electric pumps (MP-12H/12/15H).● MBSP-32 is required when stacking blocks on the electric pump (MP-10).■ SpecificationsMaximum operating pressureMPaModelMB-1MB-270MB-3■MB-1Esperblock (M Series)BlockM seriesConnection port sizeRcMounting bolts: MBH-50 (4 pcs) O-ring: AN6230-6 (1 pc) Fastener seals (4 pcs)Mounting bolts: MBH-35 (4 pcs) O-rings: P9 (2 pcs) Fastener seals (4 pcs)3/8■MBSP-31Bolt insertion lengthmmAccessoryO-rings:P9 (2 pcs) ■Hydraulic symbol (MB-1)■MB-2AccessoryApprox. weightkg855.4■Hydraulic symbol (MB-2)No.79E since2025Compatible valveCompatible pumpMP-12HMP-12MP-15HM SeriesBlockMB-1MB-2MB-3MP-10■MBSP-32■Hydraulic symbol (MB-3)Approx. weightkg6.53.4Model code structure149MB-1