HTML5 Webook

139/248

licVavesHydrau■Hydraulic symbol (EPS-2)■Hydraulic symbol (EPS-1)■EPS-2■EPS-2■EPS-11llllDllill ofliLarge-SzeModuarVavesExampesAppcationsVavesirection-ControVavesKDSeriesESeriesMSeries03Contro■ SpecificationsModel code structureEPS-1Model code structureECP-KE Series (Sub-Plates)E Series (Change Plates)Esperblock (E Series)*When mounting the EPS-1 on the SMP-30/40, a ball holder set (model SMP-30BC#14S) is required.*When mounting the EPS-1 on the MP-4, a ball retainer set (model MP-4#29S) is required.*When mounting the EPS-2 on the MP-12H, a connecting pipe set (model MP-12H#21S) and a drain pipe (MP-12H#33) are required.*When mounting the EPS-2 on the MP-15H, a connecting pipe set (model MP-15H#21S) and a drain pipe (MP-15H#33) are required.* For the external drawings of the sub-plates, see pages 120 and 138.* For details on the SMP (type 2), see page 68. K:For mounting multiple KD valvesK2:For mounting multiple 2-way valvesKD:For pressure reducing circuits with KD valves1 : Type 2 of SMP-30/40 MP-42 : MP-12H/MP-15HModelMaximum operating pressure MPaConnection port size RcEPS-1EPS-2● The ECP-K is used when a KD series plate for mounting. ● The ECP-K2 is used when the existing E series equipment is mounted with a KD series　solenoid valve.● The ECP-KD is used when a pressure reducing circuit is configured with the KD series.■ SpecificationsMaximum operating pressureMPaModelECP-KECP-K2ECP-KD■ECP-K■ECP-KCompatible pumpsCompatible pumpApprox. weight kgSMP-30 (type 2) SMP-40 (type 2) MP-4MP-12H/15H1.6■Hydraulic symbol (ECP-K2)■Hydraulic symbol (ECP-KD)■ECP-KDSub-plateE series Change plateE series AccessoryMounting bolts: EBH-50 (3 pcs)Mounting bolts: EBH-60 (3 pcs)O-ring: P7 (1 pc)Mounting bolts: MBH-50 (4 pcs)Fastener seal (1 pc)O-ring: AN6230-6 (1 pc) Approx. weightkg0.7AccessoryO-rings:P8 (4 pcs)No.79E since20251.73.5703/8Bolt insertion lengthmm20703050■Hydraulic symbol (ECP-K)■ECP-K2138