Exampes Appcationsf liControl Vavesirectil on-ControVavesKDSeriesESeriesMSeriesLarge-SzeModuar Vaves■KBSP-34 ■KPD-RK—— llolDl i l32lliHydraucVaves■ Specifications■ Specificationscat-No.78E since2017Esperblock (KD Series)KD Series (Plates for Mounting) Dedicated plates for type 2 of the SMP-30/SMP-40, and the MP-4 ● Exclusively used with type 2 of the SMP-30/SMP-40 and the MP-4.● The KSV-34 is used when plates for mounting are vertically installed on a compatible pump for circuit configuration. Valves are mounted on the side. ● The KPD-RK is a direct plate that is used when a KD 2-way valve is installed on the pump. This is used for the SMP-30 (40) RK series.● The KBSP-34 is a base sub-plate that is mounted on the pump. A KPS plate and an SMVH valve are mounted on the plate. ■KSV-34Note: Not compatible with the SMP-30NV, SMP-30AR, SMP-30SK, SMP-40NV, SMP-40AR, and SMP-40SK. ModelMaximum operating pressureSub-plate for mounting KSV-34Direct plate for pumps KPD-RKBase sub-plate KBSP-34■Hydraulic symbol (KPD-RK)■Hydraulic symbol (KBSP-34)on the opposite side. ● Mounted on a compatible pump, using the base sub-plate (KBSP-34). ■SMVH-43■Hydraulic symbolModelHydraulic symbol nameSMVH-43Center bypass■KPD-RKConnection port sizeMPaRc703/8■SMVH-43Maximum operating pressureMaximum flow rateMPa70Approx. weightkgMounting bolts:1.21.10.6Allowable back pressureL/minMPa1.5■KBSP-34AccessoryEBH-30 (3 pcs)EBH-40 (3 pcs)P7 (1 pc) EBH-40 (3 pcs)EBH-50 (3 pcs)P7 (1 pc) EBH-40 (2 pcs)EBH-45 (3 pcs)EBH-55 (3 pcs)P7 (3 pc) O-ring:Mounting bolts:O-ring:Mounting bolts:O-ring:Note: Not compatible with the SMP-30NV, SMP-30AR, SMP-30SK, SMP-40NV, SMP-40AR, and SMP-40SK. ■Hydraulic symbol (KSV-34)■KSV-34Connection port sizeApprox. weightRckg3/8Compatible pumpSMP-30B/40BSMP-30BR/40BRSMP-30C/40CSMP-30CR/40CRSMP-30DCB/40DCBSMP-30SL/40SLSMP-30SW/40SWSMP-30SP/40SPSMP-30NE/40NESMP-30RK/40RKMP-4Compatible pumpType 2 of the SMP-30/40and the MP-4128KD Series (4-Way 3-Position Manual Valve)For exclusive use with type 2 of the SMP-30/SMP-40, and the MP-4● Can maintain the pressure even during neutral and switching transition periods. The hold pressure is released by switching to the port
元のページ ../index.html#129