licVavesHydrau■KBP-31■KBP-21■Hydraulic symbol ■KIF-3■KBP-31ofliLarge-SzeModuarVavesExampesAppcationsVavesirection-ControVavesKDSeriesESeriesMSeriesContro■ Specifications■ SpecificationsKD Series (Inline Filter)KD Series (Base Plates for Stand-Alone Use) 21:For the KD-2S/2C only 31:For the KD-3S/3C only ● Used to protect individual KD valves. Maximum operating pressureMPaModelKIF-370● Used as the base when a KD valve is used stand-alone away from the pump.The plate is connected to the pump with pipes or hoses. (It cannot be mounted on the pump.)■KBP-21Maximum operating pressureMPaModelKBP-2170KBP-31(KBP-21)■Hydraulic symbol (KBP-31)■Hydraulic symbol Maximum flow rateL/minConnection port sizeRc3/8Mounting bolt(not included) AccessoryO-rings:P7 (3 pcs) EBH-30(4 pcs)Notes For pipingEsperblock (KD Series)● Clean the filter regularly. If no oil flows due to clogging of the filter, device failure will result. If entry of dust, etc. is expected, use another filter. ● If the filters are used by solenoid valves, be careful with the increased pressure loss. If a two-stage discharge pump is used, the rated low-pressure discharge volume may not be obtained due to pressure loss. ● Cannot be used for high-capacity pressure reducing circuits, etc.Inline filterKD seriesBase plateKD seriesType■KIF-3Filter mesh50Compatible valves KD-2S/KD-2CKD-3S/KD-3CNo.79E since2025Approx. weightkg0.2Approx. weightkg0.9Model code structureModel code structure124IF-BP-21K38KllllDllill
元のページ ../index.html#125