HTML5 Webook

119/248

Exampes Appcationsf liV714 llolDl i ll■Hydraulic symbol(SOW-44C)■Hydraulic symbol(SOW-44P)■Hydraulic symbol(SOW-44H)■Hydraulic symbol(SOW-44B)Control Vaves080808irectil on-ControVavesKDSeriesESeries08)621(96φ08)621(96φ08)621(96φ323232MSeriesLarge-SzeModuar VavesliHydraucVaves■ Specificationscat-No.78E since2017● Do not apply pressure for 1 minute or longer to prevent sticking of ● Operate the valve at 50 MPa or lower if it is used frequently. ● The DIN connector can rotate 90, 180, or 270° from its home the spool. orientation (4 orientations). ModelHydraulic symbol nameSOL-44SSOW-44BSOW-44HSOW-44PSOW-44C■Hydraulic symbol (SOL-44S)4×(O-ring P9)(accessory)(95)25(202.5)4425DIN connectorPush pin for manual operationMaximum operating pressureMPaModelR-43BP70R-44PNormal straightCenter bypassAll ports openP port blockedAll ports blocked ■SOL-44SMaximum operating pressureMPa4×(O-ring P9)(accessory)(13.5)(95)Push pin for manual operationConnection port sizeApprox. weightkgRcMounting bolts: MBH-50 (4 pcs) 3/8Fastener seals (4 pcs)O-ring: AN6230-6 (1 pc)Mounting bolts: MBH-50 (6 pcs) 1/2Fastener seals (6 pcs)O-ring: AN6230-9 (1 pc)Maximum flow rate L/minAccessory0 to 8 MPa8 to 70 MPa2525(95)69(309)DIN connectorCompatible AccessorySOL-44SSOW-44BSOW-44HSOW-44PSOW-44CModel code structureO-rings:P9 (4 pcs)2512No. of solenoids SOL : Solenoid on one side (2 positions)SOW : Solenoids on both sides (3 positions) Allowable back Operating voltagepressureMPa(95)25DIN connectorPush pin for manual operationCompatible ■Hydraulic symbolvalvepumpMP-17HMP-15MP-20HSeries No.100 VAC200 VAC24 VDC ■SOW-44H・44P・44C4×(O-ring P9)(accessory)Bolt insertion Approx. weightlength mmkg68(95)2544(284)Operating voltageValve type (2 positions)Valve type (3 positions)231:100 V2:200 VDC24:24 VDCS : Normal straightB : Center bypassH : All ports openP : P port blockedC : All ports blocked ■SOW-44B-270 ■SOW-44BDirection-Control Valves44 Series (4-Way Spool-Type Solenoid Operated Direction-Control Valves)* 24 VDC models are make-to-order products. * Do not allow the switching frequency to exceed 20 cycles/min* For the solenoid specifications, see page 223.* Make sure to use the DIN connectors attached to the valve. ■SOL-44S-1* If the sub-plate is mounted on a pump, a connection pipe (optional) and a return pipe (optional) are necessary. * For the external drawings of the sub-plates, see page 120.44 Series (Sub-Plate)● The sub-plate for the 44 series solenoid valves. ● The R-44P can also be used for piping.■ Specifications118SOW-44B-1