HTML5 Webook

118/248

ilsevaVcuardyH■Hydraulic symbolW:Solenoids on both sidesL:Solenoid on one side■MSW-4illlllllDlli31455 ortnoC-noitcerisnoitacppAfosepmaxEortnoCraudoMezS-egraLsevaVsevaVsevaVseireSDKseireSEseireSM■ SpecificationsModel code structureMSW-4H-1M Series (4-Way Spool-Type Solenoid Operated Direction-Control Valves)M Series (Sub-Plate)(2 positions)(3 positions) ● Do not apply pressure for 1 minute or longer to prevent sticking of the spool. ● Operate the valve at 50 MPa or lower if it is used frequently.● The DIN connector can rotate 90, 180, or 270° from its home orientation (4 orientations). ModelHydraulic symbol nameMSL-4SNormal straightMSL-4HNormally openMSL-4PP port blockedMSW-4BCenter bypassMSW-4HAll ports openMSW-4PP port blockedMSW-4CAll ports blocked■Hydraulic symbol(MSL-4S)■Hydraulic symbol(MSL-4H)■MSL-4● Used for the M series solenoid valves and can be used for both pump mount and piping. ■ SpecificationsMaximum operating pressureMPaModelMPS-3170Direction-Control Valves* There are two types of connectors: one is commonly designed compatible with both 100 V and 200 V, the other is exclusively designed compatible with 24 VDC. * 24 VDC models are make-to-order products. * Do not allow the switching frequency to exceed 20 cycles/min. * For the solenoid specifications, see page 223. ■MSL-4*A connection pipe set (model：MP-12H#21S) and a return pipe (MP-12H#33) are required for mounting on MP-12H.*A connection pipe set (model：MP-12#21S) and a return pipe (MP-12#114) are required for mounting on MP-12.*A connection pipe set (model：MP-15H#21S) and a return pipe (MP-15H#33) are required for mounting on MP-15H.*For the external drawings of the sub-plate, see page 120.No. of portsNo. of solenoidsSolenoid valveM seriesOperating voltage1:100 V2:200 VDC24:24 VDCValve type (2 positions)S :Normal straightH :Normally openP :P port blockedValve type (3 positions)B :Center bypassH :All ports openP :P port blockedC :All ports blockedMaximum flow rate L/minAccessory15O-rings: P9 (4 pcs)■Hydraulic symbol(MSW-4B)■Hydraulic symbol(MSW-4H)■MSW-4Compatible valveAccessoryM series: MSL, MSWNo.79E since2025Allowable back pressureMPaOperating voltage100 VAC200 VAC24 VDC■Hydraulic symbol(MSW-4P)Compatible pumpMP-12HMP-12MP-15HMaximum operating pressureMPa0 to 8 MPa8 to 70 MPa70■Hydraulic symbol(MSL-4P)Connection port sizeRcApprox. weightkgMounting bolts: MBH-50 (4 pcs) Fastener seals (4 pcs)O-ring: AN6230-6 (1 pc)3/8Bolt insertion length mmApprox. weightkg23■Hydraulic symbol(MSW-4C)117