tt lilO l lispmuPspmuP yre launaMaBseireSPMSspmuP cirtceEspmuPacepSreooCilspmuPcuardyHcat-No.78E since2017● There are the following types of pressure vessels, which have come into wide use: cold isostatic pressing equipment (CIP) that applies pressure to metal or nonmetallic powder statically in a high-pressure fluid for molding; hot isostatic pressing equipment (HIP) that applies not only pressure but also heat to conduct powder injection molding and sinter processing simultaneously using a property whereby the reaction, synthesis, sintering, mixing, joining, etc. are promoted. Using its ultrahigh pressure technologies, Riken designs and manufactures up to 2000 MPa pressure vessels as part of its high-pressure equipment lineup. The screw cap type is standard, but we can also manufacture the hydaulic opening/closing type, the press frame reaction force type, the breach structure (saw-tooth shape) type, etc, upon request.● For estimation, please let us know the pressure used, the inner diameter, the depth, etc., referring to the model code structure shown on the right.■PV-2K-95-650Temperature: 2000 °C(High-frequency heating system)Hydraulic cap opening/closingequipmentHigh-temperature and high-pres-sure powder injection molding■Structure of a standard screw cap type■Structure of a split-coupling support type■PV-10K-120-400Frame reaction force systemUltrahigh-pressure vessel forphysical property tests■PV-10K-8-50Screw cap type opening/closing equipmentUltrahigh-pressure vesselfor physical property tests■Structure of a press frame reaction force type■Structure of a breach structure (saw-tooth shape) typePressure vessels Model code structure■PV-15K-50-80Screw cap type opening/closing equipmentUltrahigh-pressure vessel forchemical reaction testsInner diameter (mm)Pressure2 K:200 MPa10 K:1000 MPa15 K:1500 MPaDepth (mm)Special PumpsPressure Vessels (PV Series)Make-to-order product 101PV-15K-20-80
元のページ ../index.html#102